BIFFI ICON3000 Advanced Maintenance Instructions

Installation, Operation and Maintenance Manual
MDE 257 Rev. 1
March 2021
3
Reserved Passwords
Section 2: Reserved Passwords
Upon having changed any parameter in the RESTRICTED menu, actuator power must be cycled in
order for the changes to take effect.
Contact Emerson Lifecycle Services to request access to the Level 1 and Level 2 passwords.
The list below shows the available routines in the ACTUATOR SETUP menu:
• Stroke limits
• Torque set up
• PST set up*
• ESD set up*
• EFS/PST*
• Remote controls
• Local controls
• Output relays
• Positioner*
• Fail Safe*
• Out 4 - 20 mA*
• Interlock*
• 2 speed timer
• Bus*
• Miscellaneous
• Restricted
• Reserved
The routines with marked with an asterisk (*) are present only if the relevant electronic cards are
present. Should the bus interface be LonWorks, then the BUS routine will display as "FDI CONTROL."
The RESTRICTED menu routine will only appear if the Level 2 password is entered.

BIFFI ICON3000 Specifications

General

Brand	BIFFI
Model	ICON3000
Category	Control Unit
Language	English