What to do if my BIG ASS FANS Fan will not start?
If your BIG ASS FANS Fan won't start, ensure all wires are securely connected and that the wall controller has power. Also, check that the supply power is adequate and functional. If it still doesn't start, further assistance is needed.
Why is my BIG ASS FANS Isis making a popping noise?
The popping noise from your BIG ASS FANS Fan is likely due to airfoils not being tightened to the correct torque. To fix this, switch off power at the service panel and lock the service disconnecting means. Then, tighten the airfoil hardware to 29 ft·lb (39.3 N·m). If the popping continues, check that the airfoils aren't touching each other and contact Customer Service if they are.
How to fix a popping noise coming from my BIG ASS FANS Isis Fan?
If you hear a popping noise from your BIG ASS FANS Fan, it could be due to airfoils that are not tightened properly. To resolve this: 1. Switch off power at the service panel and lock the service disconnecting means. 2. Tighten the airfoil hardware to 29 ft·lb (39.3 N·m). If the popping continues, check that the airfoils are not touching each other. If they are, contact Customer Service.
General| Brand | BIG ASS FANS |
|---|---|
| Model | Isis |
| Category | Fan |
| Language | English |
Details fan specifications like diameter, power requirements, and airfoil length.
Lists all components included with the fan package for assembly.
Details all hardware and components provided for fan installation.
Describes specialized mounting options like I-beam adapters and Z-purlin brackets.
Lists all mechanical and electrical tools required for fan installation.
Identifies the main components of the Isis® fan for installation reference.
Provides guidelines for site preparation, including mechanical and electrical considerations.
Guides selection of appropriate angle irons based on span and dimensions.
Details the process of drilling holes in angle irons for mounting.
Explains how to fasten angle irons to the structure, including torque specifications.
Instructions for attaching single angle irons to the mounting structure.
Instructions for attaching double angle irons for longer spans.
Details securing the upper mount to the prepared angle irons.
Guides selection of the fan's hanging location on wood framing.
Instructions for attaching mounting brackets to vaulted ceiling beams.
Instructions for attaching mounting brackets to floor joists.
Instructions for attaching mounting brackets to ceiling joists.
Details securing the upper mount to wood framing channels.
Instructions for fastening wood framing channels to the mounting brackets.
Guides drilling holes in a solid beam for bracket attachment.
Advises on orienting L-brackets based on beam thickness.
Details attaching L-brackets to the solid beam.
Instructions for attaching L-brackets with safety clips for inaccessible ceilings.
Details securing the upper mount to the attached L-brackets.
Securing the extension tube to the upper mount.
Attaching the safety cable to the mounting structure for safety.
Attaching the safety cable to wood framing for safety.
Attaching the safety cable to a solid beam for safety.
Attaching safety cable with clips to a solid beam.
Connecting the main fan unit to the extension tube.
Positioning and securing guy wire clamps on the extension tube.
Securing carabiners to the guy wire clamps.
Attaching a beam clamp to the structure for guy wire connection.
Attaching an eyebolt to wood framing for guy wire connection.
Guiding the guy wire through the Gripple for tensioning.
Installing and tensioning the remaining guy wires for stability.
Attaching winglets or optional airfoil tips to the fan blades.
Sliding the airfoils onto the fan hub tabs.
Securing the airfoils to the main fan unit hub.
Details voltage, amperage, and circuit requirements for the fan.
Wiring diagram for a single fan with a 120V supply.
Wiring diagram for controlling multiple fans from one controller.
Electrical wiring for a 240V, 50Hz Isis fan.
Electrical wiring for a 240V, 50/60Hz Isis fan.
Instructions for installing the 120V wall controller.
Instructions for installing the 240V, 50Hz wall controller.
Instructions for installing the 240V, 50/60Hz wall controller.
How to operate the 120V Isis fan using its controller.
How to operate the 240V, 50Hz Isis fan using its controller.
How to operate the 240V, 50/60Hz Isis fan using its controller.
Procedure for reversing the fan's rotation direction.
Wiring method for typical lighting circuits without a red traveler wire.
Operation of the limited access fan controller and its remote.
Wiring for controlling a single fan from two locations.
Procedures for yearly fan maintenance checks.
Routine checks for fan safety, operation, and condition.
Common issues and their possible solutions for fan operation.
Interpreting fan status LED codes for electrical issues.
Guidance on safely replacing fuses in the fan unit.
NFPA 13 requirements for HVLS fan installation with sprinklers.
NFPA 13 requirements for HVLS fan installation with sprinklers.
To Next Page