BIGBIG WON ARMORX - Advanced Adjustments and Battery; On-Board Profile Management; Battery Information

1. Press + ← to change the vibration intensity of trigger motor. 4 gears vibration
intensity can be changed cyclically: strong, medium, weak, off.
2. Press + → to change the vibration intensity of handle motor. 4 gears vibration
intensity can be changed cyclically: strong, medium, weak, off.
ADJUSTMENT OF RUMBLE MOTOR
ARMORX has 3 on-board profiles can be cycle switched by click the .The color
of LED1 on the left side shows different profiles.
1. Orange is the first profile.
2. Green is the second profile.
3. Blue is the third profile.
ON-BOARD PROFILE
The ARMORX has 1300mAh to satisfy 10 hours using. The biggest factor affecting
battery life is the vibration intensity of motor. The high-frequency vibration will greatly
reduce battery life.
The charging power is 5V/1A, and it will take 2 hours to fully charge.
1. Low battery: When the battery is too low, the controller will vibrate 3 times and
the LED1 will flash quickly in red. It will cycle every 5 minutes.
2. Charging: When the ARMORX is charging LED1 will be always on in red. And it
will be always on in green after fully charged.
BATTERY
Please access ”BIGBIG WON Official Website>Support” to check the instruction
https://www.bigbigwon.com/support/
DETAILED FUNCTIONAL OPERATION INSTRUCTIONS