www.bigstone-nj.com
Address：NO.38 Ningliu Road, Pukou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
10.3.3、C3: Power Assist Ratio Gear Initialization Setting
C3 is Power Assist Ratio Gear Initialization Setting, If the meter is
powered on and the power assist ratio is at gear 1, C3 should be set as 1.
If the meter is powered on and the power assist ratio is at gear 5, C3
should be set as 5.
10.3.4、C4: Motor Operating Temperature Display
The operating temperature of the motor shows there should be a
temperature sensor installed in the Inner motor to output the temperature
for signal detection simultaneously.
To Next Page
Loading...
