www.bigstone-nj.com
Address：NO.35 PuZhou Road, PuKou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
7. PAS LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the
default mode is mode 5 and it’s output power range from level 1 to level
5 (mode 3、 mode 6 and mode 9 can be customized, details in advance
setting), the default value is level 1.
8. ERROR CODE INDICATOR
If there is something wrong with the electronic control system, the
error code and error message will display in the top of screen. See the last
page Error code table for details.
※
Display return to normal only after problem being fixed and e-bike
will not run before fixing the problem.
9. BATTERY INDICATOR
9.1 Battery residual capacity indicator
The battery frame have five segments, each segment represent 20%
battery capacity. When the battery capacity is full, the five battery
segments are all light. In low battery, the outside edge of the battery
frame will flash. It indicates that the battery is severely low and needs to
be recharged immediately.
※See the picture for above messages in Full View Area .
To Next Page
Loading...
