BIGTREETECH SFS V2.0 - SFS V2.0+Octopus MAX EZ Wiring

BIGTREETECH SFS V2.0 User Manual
11
[filament_motion_sensor encoder_sensor]
switch_pin: ^PG13
detection_length: 2.88 # accuracy of motion sensor 2.88mm
extruder: extruder
pause_on_runout: False
runout_gcode:
PAUSE # [pause_resume] is required in printer.cfg
M117 Filament encoder runout
insert_gcode:
M117 Filament encoder inserted
SFS V2.0+Octopus MAX EZ