BIGTREETECH SFS V2.0 User Manual
13
SFS V2.0+SKR MINI E3 V3.0
[filament_switch_sensor switch_sensor]
switch_pin: ^PC15
pause_on_runout: False
runout_gcode:
PAUSE # [pause_resume] is required in printer.cfg
M117 Filament switch runout
insert_gcode:
M117 Filament switch inserted
[filament_motion_sensor encoder_sensor]
switch_pin: ^PC12
detection_length: 2.88 # accuracy of motion sensor 2.88mm
extruder: extruder
To Next Page
Loading...