BIGTREETECH SFS V2.0 User Manual
6
Wiring
The SFS V2.0 uses a splitting cable, the 3-pin connectors plug into the
motherboard, and the 4-pin connector plugs into the SFS V2.0.
SFS V2.0+SKR3
[filament_switch_sensor switch_sensor]
switch_pin: ^PA0
pause_on_runout: False
runout_gcode:
PAUSE # [pause_resume] is required in printer.cfg
M117 Filament switch runout
insert_gcode:
M117 Filament switch inserted
To Next Page
Loading...