BIGTREETECH SFS V2.0 User Manual
25
Caution
1) Power supply: 3.3V or 5V, please note that any higher voltage will cause
damage.
2) The housing can be damaged if quick connectors are tightened frequently or
incorrectly.
3) To connect to a motherboard without dedicated filament runout port, please
consult our technical support.
If you need further resources for this product, you can find them at
[GitHub](https://github.com/bigtreetech/). If you cannot find what you need, you may
contact our after-sales support(service005@biqu3d.com).
If you encounter any other problems during use or have suggestions or feedback, please
contact us. Thank you for choosing BIGTREETECH products.
To Previous Page
Loading...
Need help?
General