Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
4 / 8
1 Brief Introduction
BIGTREETECH TFT35 SPI V2.1 is a medium-size and clear 3D printer display
developed by the 3D printing team of Shenzhen Big Tree Technology Co., Ltd.
1.1 Main Features
1. SPI is used for LCD display, and I2C is used for touch. The touch screen is
controlled by the chip on the motherboard, which significantly reduces its
cost.
2. It is connected to the motherboard through the FPC cable, simple and
convenient.
3. Designed with XH2.54 terminal, which can communicate with the board
through the terminal.
1.2 Product Parameters
1. Product Dimensions: 98 x 56mm
2. Mounting Dimensions: 98 x 56mm, you can read more details here:
BIGTREETECH TFT35 SPI V2.1_SIZE
3. Input Voltage: DC 5V
4. Logic Voltage: DC 3.3V
5. Screen Size: 3.5-inch
6. Resolution: 480x320
7. Driver IC for SPI Display: ILI9488
8. Driver IC for Touch: NS2009
1.3 Indicator Light
When the motherboard is powered on: the power indicator, D2 red light, lights up,
indicating that the power supply is functioning normally.
To Next Page
Loading...
Need help?
General
