Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
8 / 8
Uncomment overlays=tft35_spi to enable TFT35 SPI screen (Delete '#' at the
beginning of the line).
NOTE: If the OS image of v2.2.1 version is used. Set to overlays=tft35_spi25
instead of overlays=tft35_spi Use the SPI speed of 25Mhz instead of the default
50Mhz to avoid display confusion. If the OS image after V2.2.1 is used, The OS
will use a lower and more stable speed by default.
To Previous Page
Loading...
