EasyManua.ls Logo

Bil-Jax 4527A User Manual

Bil-Jax 4527A
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ARTICULATE BOOM LIFT - Bil-Jax #4527A, .
45’ / 51’ Battery-Operated, Towable Unit .
2015 - Operational and Safety Information”… .
from; TAYLOR RENTAL CENTER
1560 Hwy. 1 South / MLK Blvd. Greenville, MS. 38701, phone; (662) 335-3535
store hours; 7:00 am - 5:30 pm Monday thru Friday, 7:00 am - 11:00 am Saturdays
store email; trcgreenville@gmail.com, web site; taylorrentalgreenville.com
------------------------------ Serving the Greater Delta Area since 1979” -----------------------------------
Like anything else at our location, each and every piece of equipment has an inherent risk of operator error that can .
lead to accidents and injury. An aerial work platform (AWP), like other equipment when properly used by skilled .
operators, is relatively safe. However, should an incident happen, the chances of a catastrophic accident are greater .
than with other equipment. This statement applies to our “Bil-Jax #4727A”, Battery .
Operated, Towable Articulated Boom Lift. We have tried to cover safety information and .
issues as we know them at this time. With that in mind, please take a few moments to go .
over the information printed below. These recommendations are from the equipment .
manufacturer, the rental industry, trade magazine articles, insurance companies and our .
own staff. We have compiled them to help to lessen the chances of accident or injury! .
While our “Operational and Safety” information only hits a “few high point” and contains .
“some” useful information, we strongly encourage you to take the time to read and review .
The “complete” manufacturer’s “Operation and Safety Manual”. TRC also encourages .
Reading and reviewing the safety publication; Statement of Best Practices for Workplace .
Risk Assessment and Aerial Work Platform Equipment Selection. This booklet was .
developed to aid the identification of workplace hazards, offer guidance for workplace .
risk assessment and implementing control measures and assists in the selection of the .
most appropriate AWP equipment for the work required. If you should have any questions,.
please stop and call TRC immediately at our store location; (662) 335-3535 or after hours .
at; (662) 822-1909 or (662) 822-1907. Never use “any equipment” in doubt! .
A. MACHINE’S INTENDED USE;
This “Towable Articulate Boom Lift” is designed for lifting one or two persons with small lightweight handheld items
(in a confined length - within the basket area). This unit may be used on “reasonable level” hard surfaces or hard
ground areas. The total weight of person or persons and small handheld items should not exceed 500 lbs. Do not
use this equipment for anything other than what the manufacturer’s intended use. This unit is not designed to
perform crane work, nor is it designed to be used as a support structure. If you have any questions on the
manufacture’s intended use or intentions, consult with TRC or reread the manufacturer’s “Operation and Safety
Manual! Do not alter or modify this equipment in any way. Make sure the job work is matched to the intended use,
design and ability of the machine. Furthermore … this equipment is designed and manufactured in compliance with
the duties, responsibilities and standards set forth for manufacturers in the ANSI 92.2 standard in effect at the time
manufacturer. This equipment will meet or exceed applicable OSHA codes and ANSI A92.2 standards when used
in accordance with sections 7,8,9 & 10 of ANSI A92.2 and any other manufacturer’s recommendations.
B. MACHINE’S (RENTAL) DESCRIPTION;
Equipment;
TOWABLE, ARTICULATE BOOM LIFT; (TRC computer description; LIFT, BOOM ART - TOW 45’ - 51’); comes
equipped with the following; 1x - Manufacturer’s “Operator’s Manual”, 4x - Hydraulic Operated Outriggers,
1x - Battery Charger.
Accessory Rental Items;
SAFETY LANYARD; (TRC computer description; (LIFT, xa item SAFETY LANYARD); This is a “required item”.
We priced it separately because some of our customers have their own safety “harness” equipment.
EXTENSION CORD; (TRC computer description; (CORD, EXTENTION 12/3 - 20’); is priced separately. This is used
to charge the machine during it’s off hours. (this is the maximum length suggested by the manufacturer)
SAFETY BARRICADES and CONES; (TRC computer descriptions; (SAFETY BARICADE DRUM) and (SAFETY CONE -
18” reflective) are priced separately. We strongly suggest using these if you have vehicular or pedestrian
traffic nearby.
Related Merchandise / Resale Items;
2” TRAILER BALL; (TRC computer description; TRAILER, TOWING BALL - 2”); is priced separately. Customer
must use a 2” diameter with at least a 4,500 lb. or higher tow capacity.
BARRICADE SAFETY TAPE; (TRC computer description; SAFETY, BARRICADE TAPE); is priced separately. We
offer this in a yellow “Caution” Tape or a red “Danger” Tape. Both available in 300’ or 1,000’ lengths.
BARRICADE SAFETY FENCING; (TRC computer description; SAFETY, BARRICADE FENCING); 50’ fencing is
priced separately.
C. MACHINE SPECS; (for further information, see the Manufacturer’s “Operator’s Manual”, page; 11)
OPERATIONAL DATA; Maximum Platform Height; 45’, Working Height; 51’. Maximum Horizontal Outreach; 27’
(from Centerline; 27’, from Outrigger Footpad Edge; 21’). Rated Platform Capacity; 500 lbs. Maximum Occupants;
2. Turntable Rotation; 700 degrees Non-Continuous. Leveling Capacity; 12.5 degrees. Localized Pressure per
Outrigger. Function Speed; Boom Raise (Fast); 30-35 seconds, (Slow); 50-55 seconds. Boom Lower (Fast);
45-50 seconds, (Slow); 120-150 seconds. Boom Extended (Fast); 30-35 seconds, (Slow); 75-90 seconds.
Turntable Rotation; (Fast); 82-90 seconds, (Slow); 100-110 seconds. Platform Level; (Fast); 8-10 seconds,
2015 - BIL-JAX #4725A, TOWABLE - ARTICULATE BOOM LIFT - OPERATIONAL & SAFETY INFO page 1 - 12
Question and Answer IconNeed help?

Do you have a question about the Bil-Jax 4527A and is the answer not in the manual?

Bil-Jax 4527A Specifications

General IconGeneral
BrandBil-Jax
Model4527A
CategoryBoom Lifts
LanguageEnglish

Summary

Machine Intended Use

Machine Rental Description

Equipment and Accessories

Details of the main equipment and optional rental accessories provided.

Related Merchandise

Items available for resale, such as trailer balls and safety tape.

Machine Specifications

Operational Data

Key performance metrics including height, outreach, capacity, and speed.

Machine Specifications Continued

Instrumentation and Controls

Details on buttons, indicators, and control station functions.

Braking, Electrical, Hydraulic Systems

Specifications for parking brakes, electrical system, and hydraulic system.

Tires and Operating Weight

Information regarding tire specifications and overall machine weight.

General Warnings

Usage Responsibilities

Site Inspection Procedures

Guidance for inspecting the job site for potential hazards before operation.

Machine Maintenance and Inspection

Procedures for daily, weekly, monthly checks and detailed machine inspections.

Usage Responsibilities Continued

Hydraulic Leaks and Work Safety

Checking for hydraulic leaks and general work safety precautions.

Electrical Safety and Clearances

Safety measures regarding electrical hazards and minimum approach distances.

Operational Use and Welding Safety

Guidelines for safe operational use and specific warnings about welding.

Controls and Functions - Ground

Ground Control Station Overview

Description of the ground control panel layout and its components.

Outrigger and Power Controls

Functions of outrigger controls, power, and battery indicators.

Operational Buttons Functions

Details on speed, boom extend/retract, and raise/down buttons.

Controls and Functions - Platform

Platform Control Station Overview

Layout and functions of the control panel located on the work platform.

Battery Condition and Emergency Stop

Information on battery status indicators and the emergency stop function.

Boom Control Functions

Operation of boom extend/retract, raise/down, and rotation controls.

Operation Instructions

Normal Operating Procedures

Step-by-step guide for standard boom lift operation.

Manual Boom Operation

Procedures for manual retraction, rotation, and lowering during power loss.

Manual Lowering Procedure

Specific instructions for manual lowering in emergency situations.

Operation Instructions Continued

Manual Operation Details

Further details on manual boom retraction, rotation, and lowering.

Recharging Lift Batteries

Battery Charging Process

Instructions for charging the lift batteries, including safety precautions.

Battery Fault Codes

Reference table for battery fault codes and their potential causes.

Boom Lift Transport - Road Travel

Trailer Hitching and Towing

Guidelines for safely hitching the trailer and towing the boom lift.

Transport Time Periods

Information on rental periods and machine return times.

For Your Convenience

Rental Items and Safety Gear

List of available rental items and personnel safety equipment.

Related Equipment Categories

Overview of other equipment categories available for rent.

Related product manuals