What to do if there are no lights on the panel of my Bil-Jax 45XA?
If there are no lights on the panel when the key switch is turned to the on position for your Bil-Jax Boom Lifts, consider the following: * Disengage any engaged Emergency STOP buttons. * Recharge the battery if the charge is low. * Inspect and repair any loose battery connections. * Plug in the main disconnect if it is unplugged. * Replace the fuse if it is blown.
General| Brand | Bil-Jax |
|---|---|
| Model | 45XA |
| Category | Boom Lifts |
| Language | English |
Essential checks and considerations before starting the operation of the aerial work platform.
Key safety precautions and procedures to follow while the aerial work platform is in use.
General safety guidelines to follow when performing maintenance on the aerial work platform.
Routine checks to be performed daily or before each operation to ensure machine safety and functionality.
Description and operation of the ground control panel for outriggers and boom motion.
Basic troubleshooting steps for common problems encountered with the aerial work platform.
Explanation of error codes displayed on the control panel and their potential causes.
Technical specifications of the aerial work platform, including dimensions, capacity, and performance.
To Next Page
