SELF-PROPELLED
AERIAL WORK PLATFORM
This equipment is designed and manufactured in
compliance with the duties, responsibilities and
standards set forth in the ANSI, CE, CSA and/or AS
standards in effect at the time of manufacture.
This equipment will meet or exceed applicable ANSI,
CE, CSA and/or AS codes and standards when
operated in accordance with manufacturer’s
recommendations.
It is the responsibility of the user to follow all regional
codes and regulations that govern the safe operation of
this equipment.
Obtain, read and obey all safety precautions before
performing maintenance or repairs or attempting to
operate this equipment. This includes all manufacturer
recommendations as well as those directives set forth by
government and local authorities.
To ensure proper and safe use of this equipment, it is
strongly recommended that only trained and authorized
personnel attempt to operate and maintain the boom lift.
This manual shall be considered a permanent and
necessary component of the machine and shall be kept
with the boom lift at all times.
Owners and Lessors should complete a full inspection of
all components and perform a test of all functions,
including brake functions, before commissioning or
reselling the machine. Repair or replace all damaged or
malfunctioning components.
BilJax, Inc. is dedicated to the continuous improvement
of this and all BilJax products. Therefore, equipment
information is subject to change without notice. Direct
any questions or concerns regarding errors or
discrepancies in this manual to the BilJax Service
Department.
Copyright © BilJax, Inc. 2009. All Rights Reserved.
“BilJax” and “X-Boom” are trademarks of BilJax, Inc., a
member of the Haulotte Group. Contact BilJax for
replacement manuals.
125 Taylor Parkway
Archbold, Ohio 43502
Phone (800) 537-0540
(419) 445-8915
Fax (419) 445-0367
P/N B33
-01-0104 - 01 http://www.
biljax.com
To Next Page
Loading...
