Bil-Jax 45XA - Workplace Inspection

BILJAX 45XA
14
WORKPLACE INSPECTION
Before operating the machine, be aware of and
avoid the following:
 Drop-offs
 Holes
 Floor obstructions or debris
 Sloped surfaces outside the capabilities of the
boom lift
 Unstable or slippery surfaces
 Surfaces that will not support the load forces
imposed by the machine or outriggers
 Overhead obstructions and high voltage
conductors
 Sinkholes and untamped earth fills
 Personnel
 Unsafe weather conditions
 Other vehicles and equipment
 Other unsafe conditions