Billion BiPAC 7300N User Manual

BiPAC 7300(N)
802.11n ADSL2+ Firewall Router
User Manual
Version Released: 1.14 (FW: 1.07)
Last Revised on 3-10-2010

Billion BiPAC 7300N Specifications

Summary

Chapter 1 Introduction

1.2 Product Features

Details the key features of the BiPAC 7300(N) router, including ADSL, wireless, and Ethernet.

Chapter 2 Product Overview

2.1 Important Notes & Safety

Lists crucial safety and handling precautions for the BiPAC 7300(N) router.

2.3 Front Panel LEDs

2.4 Rear Ports Identification

Chapter 3 Installation

3.1 Before Configuration Steps

3.2 Factory Default Settings

Lists default login credentials, IP settings, and DHCP server configurations.

3.4 ISP Connection Information

Lists required information from the ISP for establishing a connection.

3.5 Initial Configuration Wizard

Guides users through the initial setup process using the Easy Sign-On wizard.

Chapter 4 Basic Configuration

Web Interface Access

4.1 System Status Overview

Displays detailed device information, port status, and WAN connection parameters.

4.3 WAN Connection Setup

Explains how to configure WAN connection parameters like VPI/VCI, username, and password.

4.4 WLAN Wireless Setup

Details WLAN parameters such as ESSID, Channel ID, and Security Mode.

WPA/WPA2 Wireless Security

Configures WPA/WPA2 security settings for the wireless network.

WEP Wireless Security

Configures WEP security settings for the wireless network.

Chapter 5 Advanced Configuration

5.1 Status Information

Provides access to detailed status information like ADSL, ARP, DHCP, and logs.

5.1 Device & System Status

Displays device information, host name, system up-time, and hardware/software versions.

WAN Connection Details

Provides details on WAN port, protocol, connection status, IP, Netmask, Gateway, and DNS.

5.1.1 ADSL Status Monitoring

5.1.4 System Event Log

5.1.5 Firewall Activity Log

Records firewall activities, including intrusion detection and blocked WAN PINGs.

5.3.1 LAN Settings

5.3.1.3 Wireless LAN Setup

5.3.1.4 Wireless Security (WPA/WPA2)

Configures security settings like WPA/WPA2 for the wireless network.

5.3.1.4 WEP Security Settings

5.3.1.5 WPS Setup

5.3.1.6 DHCP Server Configuration

Configures the DHCP server to automatically assign IP addresses to network devices.

5.3.2 WAN Network Settings

5.3.2.1 WAN Profile Setup

Defines connection profiles for WAN, including PPPoE and PPPoA.

EWAN Ethernet Port Setup

5.3.3 System Management

5.3.3.2 Firmware Upgrade Procedure

Provides instructions for upgrading the router's firmware.

5.3.3.3 Backup and Restore Settings

Allows saving and restoring router configuration settings.

5.3.3.4 Router Restart Options

5.3.3.5 User Account Management

5.3.4 Firewall and Access Control

Details firewall and access control features to protect the network.

5.3.4.1 Packet Filtering Rules

Configures rules to block or allow network traffic based on IP address and port.

5.3.4.2 MAC Address Filtering

5.3.4.3 Intrusion Detection System

Detects and blocks malicious network attacks like DoS and SYN floods.

5.3.4.5 URL Filtering Settings

5.3.5 QoS Traffic Management

5.3.6 Virtual Server Setup

5.3.6.1 Port Mapping Rules

5.3.9.3 Dynamic DNS Setup

5.3.9.5 Device Management Options

5.3.9.8 Remote Access Control

5.4 Save Configuration to Flash

5.5 Restart Router

5.6 Logout Procedure

Chapter 6 Troubleshooting

Problems Starting Router

Lists common startup issues and their corrective actions.

WAN Interface Problems

Covers issues related to WAN connection initialization and stability.

ADSL Linesync Loss Issues

Addresses frequent ADSL disconnections due to line or filter issues.

LAN Interface Problems