What to do if I forgot my Billion Wireless Router password?
If you've forgotten your Billion Wireless Router login, try the default username "admin" and password "admin". If that doesn't work, restore the router to its factory settings by pressing the reset button on the rear side of the device.
Why does my Billion Wireless Router frequently disconnect from the ADSL line?
Frequent disconnections of your Billion Wireless Router may be due to missing or incorrectly installed line filters. Ensure all devices connected to the same phone line (telephones, fax machines, etc.) have a line filter between them and the wall socket, unless you're using a Central Splitter or Central Filter installed by an electrician. Make sure all line filters are installed correctly. If you have a back-to-base alarm system, contact your security provider for assistance.
What to do if I cannot PING any PC on LAN using Billion Wireless Router?
If you cannot PING any PC on your LAN, first check the Ethernet LEDs on the front panel of your Billion Wireless Router. The LED should be lit for the port with a PC connected. If it's not lit, ensure the cable between your router and the PC is properly connected. Also, verify that the IP address and subnet mask are consistent for both the router and the workstations. Make sure you have uninstalled your firewall program before troubleshooting.
How to fix Billion Wireless Router when none of the LEDs light up?
Check the connection between the router and the adapter. If the problem persists, it is most likely due to a hardware malfunction.
General| Ethernet WAN | Yes |
|---|---|
| SIM card slot | No |
| Routing protocols | IP |
| Supported network protocols | IPv4 or IPv4 / IPv6 dual stack, RIP-1/2 |
| Security algorithms | 64-bit WEP, 128-bit WEP, SSID, WDS, WPA-PSK, WPA2-PSK, WPS |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1300 Mbit/s |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 4 |
| Product type | Tabletop router |
| Product color | White |
| Ethernet LAN interface type | Gigabit Ethernet |
| Output current | 2 A |
| Output voltage | 12 V |
| Power source type | DC |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 95 % |
Weight and Dimensions| Depth | 32.9 mm |
|---|---|
| Width | 190 mm |
| Height | 151 mm |
Details NAT firewall, SPI, DoS prevention, and packet filtering.
Crucial warnings and attention points for safe router operation.
Guides for configuring PCs for network connection in various OS.
Information on default usernames, passwords, and IP addresses.
How to access and log into the router's web-based configuration.
Provides a simplified, guided process for initial router setup.
Setup and manage the 2.4GHz wireless network.
Secures the wireless network using WPA2-PSK and AES encryption.
Configure PPP over Ethernet connection with ISP details.
Configure 3G/LTE connection for mobile internet access.
Update the router's software to the latest version.
Configure security features like IP filtering and MAC filtering.
Prioritize and manage network traffic for applications.
Solutions for common router operational problems and login issues.
Solutions for issues related to WAN connection stability.
Addresses frequent ADSL disconnections and sync issues.
To Next Page
