charger in order to maintain the battery level. The
unit is not designed to run on battery power alone,
the battery is there for backup purposes only.
5.2 First Use
1). Insert a SD card (not provid ed) in the SD card slot.
Your dashboard camera accepts 4GB SD cards or
above, up to 32GB capacity (Must use Class 10 or
above). It is recommended that you format the SD
card before use. Please refer to the Main Settings
described in thi s ma nual to format SD card.
2). Your dash camera will powe
r on and start to
record automatically as soon as it is connected to
power source that comes on when you start the
engine of your vehicle.
3). You can also power it o n manually by pressing
the Power On/Off button.
4) The power LED (Red) will turn ON when the
power is plugged in. Whenever the device is turned
ON or OFF, you will see a splash screen showing the
Binatone logo.
9
To Next Page
