6. Usi ng your Dashboard Camera
6.1 Recording and Saving
The purpose of your dashboard camera is t o
continuously record the road ahead, and to
automatically record and save any incidents or
accidents you might be involved in.
SD card storage space has been set to: around 60%
for GENERAL, around 30% for EVENT, 10 % for
PHOTO and cache fi les. Once the
GENERAL/EVENT file is full, it will automatically
overwrite the oldest footage.
6.2 Switching Modes
You can switch between video and playback mode
by pressing the mode button. video mode is the
default mode. To view or delete sa ved f ootages and
photographs, switch to playback mode.
IMPORTANT!
The driver must never switch modes while the car is
in motion.
10
To Next Page
Loading...