9.3 How to Connect the device to Dashcam
Connecting your device to the Dashcam works
similarly as connecting your device to a Wi-Fi
network.
9.3.1 Make s ure that your Dashcam is powered on
by the car a dapter (Red and blue light on), and the
Wi-Fi is opened.
Hot key: The Wi-Fi is “On
”
as the default when
power supply is connected, if you want to turn off the
Wi-Fi, please long press lock button in video
recording mode.
On: the Wi-Fi icon is White
Off: A red slash on the white Wi-Fi icon
Co
nnected: the Wi-Fi icon is green.
Note: You c annot ope n the Wi-Fi if with out power
supply.
9.3.2 Go to Settings
Wi-Fi and select
“FHDxxxxxx_xxxxxxxxxxx” from the list of networks.
Enter password (the default password is 12345678)
and tap Join.
9.3.3 Open HubbleClub Dashcam app, and tap
“Connect to the dashcam” to connect your Dashcam.
Note:
1. Your Dashcam cannot be operated if the Wi-Fi is
connected.
17
To Next Page
Loading...
