5). Language
Set the language as needed.
6). Frequency
Select exposure, used to adjust exposure level for
different light condit ions. The default setting is 50 HZ,
you can set it to 60 Hz.
7). LCD OFF
You can set the LCD to never turn off (Default) or
turn off after 1 minutes, 3 minutes.
Hot key: Short press power button in power-on state.
8). Exposure
Used to adj ust e xpo sure level for different light
conditions. You can adjust the exposure as you
require.
9). GPS Status
Check the G
PS signal
10). Format
Use this option to format your SD Card.
IMPORTANT!
Formatting the SD c ard will delete all its storage
contents.
11). Default Setting
Reset all your device settings to factory default.
12
To Next Page
Loading...
