room for the latest file. Choose the default duration
for each recording c luster: 1 Minute(default) / 3
Minutes / 5 Minutes
3). G-Sensor
G-Sensor detects forces which will automatically
protect the current recording in the e ven t of a
collision. You can change the sensi tivity of the
sensor. It is set to Low by default, but can be set to
Off/High/Medium/Low(default).
Hot key: Lock/Unlock the Video:
In case of emergency, you can l ock/unlock the
current video by pressing on the
lock button when
recording. The video footage of the locked video will
be saved in th e EVENT folder.
4). Parking mode
Enable or disable parking mode. Due to technical
reasons, Parking mode is disabled by default.
Your dashboard camera can record footages of
events occurring when your car is pa rked with engine
off. The built-in battery will keep th e sensor of your
device in stand-by mode, and will s tart recording
automatically for 30 seconds if it detects vibration or
shock. P
arking mode can only record and save a
footage after an e ven t has been detected by the
sensor.
5). Record audio
Enable or disable microphone.
14
To Next Page
Loading...
