EasyManua.ls Logo

Bio-Art A7 Plus - Safety Rules

Bio-Art A7 Plus
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 - SAFETY RULES
This manual only contains basic and simplified information regarding the use of the
instrument and under no circumstances it is a substitute for a proper training course. The
articulator and face-bow are products aimed at the exclusive use of qualified dental
professionals.
The Bio-Art face-bow is designed for use with Bio-Art's own articulator and vice-versa.
Although, the Standard face-bow is compatible with other articulator models, its use with
similar models should be consulted.
Bio-Art articulators are not interchangeable, i.e. the casts mounted on one articulator
model should not be transferred (mounted) to any other articulator. Therefore, Bio-Art does
not guarantee precision when casts mounted on one articulator are transferred to another.
The only Bio-Art articulators, which are interchangeable, are those which are calibrated in
the factory. Thus, for safe and precise interchangeability, casts should be transferred only
between calibrated articulators.
Before using the articulator and face-bow, the professional should check the instrument for
possible damage, distortion of the incisal pin, face-bow's parallelism, proper centricity of
the incisal pin in relation to the lower frame, etc. Should any abnormality be found, Bio-Art's
Technical assistance or Authorized Representative should be contacted immediately.
The face-bow should be cleaned with warm water prior to its use. The Bite Fork must be
autoclaved and the Earpieces disinfected with a bactericide or with 70° alcohol.
Bio-Art recommends only warm water for the general cleaning of the articulator and face-
bow.
When using “godiva” or any other registration material, special care should be taken to
avoid excessive heating of the material, which might burn the patient's mouth. Bio-Art
urges the user to carefully follow the instructions of the registration material manufacturer.
Because the articulator is a precision instrument, it should be handled, transported and
stored carefully. Bio-Art provides a plastic case (optional accessory) exclusively designed
to accommodate the articulator and to facilitate its transportation.
8 - TECHNICAL SERVICE
For your safety, the technical service of this product should be made by people/companies
authorized by BIO-ART. Please contact us or the distributors, where the product was
acquired.
Our web site is: www.bioart.com.br
12

Related product manuals