Bio Compression Systems SC-3004-DL - Troubleshooting Common Issues; Device Classification Details

15
TROUBLESHOOTING
If the correcve acon does not solve the problem, then call Bio Compression Systems, Inc.,
at 1-800-888-0908. Be sure to have serial number available when calling for service.
NOTE: In addion to possessing proper tools and tesng equipment, authorized service
personnel have access to all electrical schemacs, calibraon instrumentaon and
criteria and an inventory of authorized replacement parts.
Symptom Possible Cause Correcve Acon
The device is not working.
No electricity Check the electrical wall outlet to be sure that
the pump is plugged into the outlet correctly.
Check the circuit breaker to be sure there is
power to the outlet.
Power cord
Unplug the power cord and look for any
damage or defects.
One garment inates but the
second one does not.
The second garment is not
receiving air.
Check the garment hoses for adequate connec-
on to the device, kinks, punctures, twists and /
or folds.
The device is making strange
and/or loud noises.
Device is on a uneven or
unstable surface
Move to a more stable surface.
An internal problem Contact Bio Compression Systems, Inc., for
repair.
Regardless of the pressure
seng the garments are
applying a very low pressure.
Defecve Garment Check the garment for adequate connecon to
the device, leaks, kinks, punctures, twists and /
or folds.
An internal problem Contact Bio Compression Systems, Inc., for
repair.
CLASSIFICATION:
1. Class of protecon against electrical shock
CLASS II EQUIPMENT
2. The degree of protecon against electric shock
APPLIED PART—TYPE B
3. Mode
Connuous operaon with intermient loading or one hour med
4. According degree of protecon against ingress of water: IP20
(without protecon against ingress of water)