Bio Compression Systems SC-3004-DL - 4 Chamber Garment Details; Garment Components and Initial Setup

8
4 Chamber Garment:
Garments are available in the size and conguraon to ensure both an eecve
treatment and maximum comfort. Please refer to secon (2.5 Pung the garment on) in
the operang manual for instrucons on how to apply your garment.
LATCH CONNECTORS: Aach and detach the garment to the pump.
They aach to the Receptor Ports (7) on the front of the device.
A second garment can aach to the auxiliary receptor ports (8) for bilateral use.
(Keep the blocker bars installed for single garment use).
TUBING: Brings air from the pump to the garment.
GARMENT: Applied part for treatment, with four segregated pneumac chambers.
OPERATING INSTRUCTIONS:
1. Unpacking Equipment
1.1 Open the shipping box and li the device up and out of the box.
(Please be sure to SAVE your shipping box for future transporng or shipping.
When transporng, the shipping box is equipped with a special “fold-up” handle
for easy carrying)
1.2 Remove the protecve end caps from the side of the device.
1.3 Remove the garment from the plasc bag and unroll both tubing secons. Unfold
the garment and spread it at.