T
he Biodex Gait Trainer can be used for gait training applications, or as a rehabilitation treadmill.
The following section describes use in the Gait Training Mode. Rehabilitation treadmill operation
is described later in this manual.
&&&$ !
The Gait Training Mode is useful for the rehabilitation and retraining of gait for patients with neu-
ralgic and orthopedic gait dysfunctions. It provides both audio and visual feedback for patient
compliance. The rhythmic movement of the treadbelt along with the audio and visual biofeed-
back, provides the necessary stimulus for retraining neural pathways, thus improving the gait pat-
tern of the patient.
It is recommended that the Biodex Unweighing System be used in conjunction with the Gait Trainer
to provide a safe environment for the patient and clinician, and also to allow for proper patient positioning
for weight distribution and coordination of balance.
"!)$'"
(See Figure 4.1)
To provide power to the Gait Trainer, ensure the power plug is connected to an appropriate sock-
et. Press the ON/OFF switch, located on the base of the Gait Trainer in the left corner at the front
end, to the “l” (ON) position.
Figure 4.1. The Gait Trainer Opening Menu.
4. GAIT TRAINING MODE
— 4-1 — GAIT TRAINING MODE
To Next Page
Loading...
