4
3. BIOHIT OPTIFIT TIPS
The full range of Biohit pipette tips are recommended for use with
Biohit mLINE pipettes. Biohit standard tips are made of virgin
polypropylene. Biohit also offers a full range of Safetyspace fi lter
tips. Biohit standard tips are available as bulk packages, space
saving refi ll systems and autoclavable (121°C, 20 min, 1 atm) trays.
Pre-sterilized tips in trays are also available. (Fig. 1.)
Fig. 1.
4. UNPACKING
The Biohit mLINE pipette package contains the following items:
1. Pipette
2. Tip
3. Caps for colour coding
4. Calibration tool (also tube and ID window opener)
5. Pipette holder
6. Identifi cation tags
7. Safe-Cone fi lters (pipettors >10 μl)
8. Grease
9. Instruction manual
10. Performance certifi cation in accordance with ISO 8655-6
Please check that all items are included and that no damage has
occurred during shipment.
5. PERSONAL IDENTIFICATION
Each Biohit mLINE pipette can be identifi ed with a tag located
underthe ID window which is placed on the fi nger support.
1.
Remove the ID window by using the calibration tool (Chapter 7.).
2. Remove the tag and mark the identifying information on it.
3. Position the tag on place and clip the window back into
place.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
