Biorep Technologies PERI-4.2 - Site Preparation; Packing List

5
1.5 Site Preparation
This machine is intended to work in a controlled laboratory environment. In order to properly place the machine,
please refer to the figure below. The machine has a ventilation opening in the rear, which should not be blocked.
A 12.7cm (5.0 in) clearance is recommended between the back of the machine and any obstacle. Bench-space
required is 49cm (19.3 in) x 65cm (25.6 in).
Figure 1: Site Preparation
1.6 Packing List
The following items are included with the purchase of a Perifusion system:
Qty
Reference
Description
1
86610610
Power Cord
12
PERI-CASSETTE
Pump cassettes
12
PERI-CHAMBER
Perifusion Chambers
1
PERI-TUB-12
Two-Stop Tygon Tubing Set (pack of 12)
1
PERI-TUB-040
Silicone Tubing (50 ft)
1
PERI-FILTER
Fiberglass Pre-filters (pack of 10)
1
PERI-BEADS-20
Bio-Gel P-4 Gel (20 grams)
1
PERI-RACK
Perifusion Chamber Rack
1
12885T21
Single Hole Punch
1
PERI-96-PLATE
96 well-plate
15
PERI-NOZZLE
Dispensing Nozzle
1
TUB-16
Size 16 Tubing for cooling tray
50
PERI-ORING
Perifusion Chamber O-rings
12
PERI-CLIPS
Pack of Clips
Table 1: Packing List