4
DURING OPERATION
Do not leave the operating unit unattended.
Do not impede the platform motion.
Do not operate the unit in environments with aggressive or explosive chemical mix-
tures. Please contact manufacturer for possible operation of the unit in specific at-
mospheres.
Do not operate the unit if it is faulty or has been installed incorrectly.
Do not use outside laboratory rooms.
Do not check the temperature by touch. Use a thermometer.
ALARM SOUND SIGNALS
Frequently repeating short notes after finishing the operation (see 5.6.3).
Infrequently repeating short notes if an error occurred (see 9.5)
BIOLOGICAL SAFETY
It is the user’s responsibility to carry out appropriate decontamination if hazardous
material is spilt on or penetrates into the equipment.
To Next Page
Loading...
