5
3. General information
TS-100 and TS-100С thermo-shakers are designed for intensive mixing of samples
in microtest tubes or PCR plates in a temperature controlled environment. The TS-100C
model of thermo-shaker differs from TS-100 in the possibility of cooling samples down to
+4°C. Features of thermo-shakers meet the highest expectations of users according to many
parameters:
Fast reaching of specified mixing speed and maintenance of equal amplitude of rota-
tion throughout the thermo-shaker block;
Stability of maintaining the set temperature in a wide range throughout the block sur-
face of thermo-shakers;
With the help of the temperature calibration function, the user can calibrate the unit
approximately ±6% of the selected temperature to compensate differences in the
thermal behaviour of tubes from different manufacturers;
LCD display indicates pre-set and current values of temperature, speed and time of
operation;
Quiet motor operation, compact size, prolonged service life;
Sensor error handling and diagnostics;
Functions of heating and mixing can be performed either simultaneously or inde-
pendently, that allows using the unit as three independent devices:
1. Thermostat;
2. Shaker;
3. Thermo-shaker.
We offer five heating and cooling blocks for each model, including a block with a
plastic lid for PCR-plates. Within one model of thermo-shaker, the blocks are mutually inter-
changeable and can be easily installed.
The devices are applicable in:
genetic analyses – in extraction of DNA, RNA and further sample preparation;
biochemistry – for studying of enzymatic reactions and processes;
cellular biology – extraction of metabolites from cellular material.
To Next Page
