3
2. Safety precautions
The following symbols mean:
Caution! Make sure you have fully read and understood the present Manual
before using the equipment. Please pay special attention to sections
marked by this symbol.
Caution! Hot surface! Platform surface becomes very hot during use. Always
use protective cotton gloves to install or remove samples when the
temperature is set higher than 60°C.
GENERAL SAFETY
Use only as specified in the operating manual provided.
Save the unit from shocks or falling.
Store and transport the unit in a horizontal position (see package label) at ambient
temperatures between -20°C and +60°C and maximum relative humidity of 80%.
After transportation or storage keep the unit under room temperature for 2-3 h before
connecting it to the electric circuit.
Use only original parts and accessories, provided by manufacturer for this product.
Before using any cleaning or decontamination methods except those recommended
by the manufacturer, check with the manufacturer that the proposed method will not
damage the equipment.
Do not make modifications to the design of the unit.
ELECTRICAL SAFETY
Connect only to the external power supply with voltage corresponding to that on the
serial number label.
Use only the external power supply provided with this product.
Ensure that the power switch and external power supply are easily accessible during
use.
Do not plug the unit into an ungrounded power socket, and do not use an ungrounded
extension lead.
Disconnect the unit from electric circuit before moving.
If liquid penetrates into the unit, disconnect it from the external power supply and
have it checked by a repair and maintenance technician.
Do not operate the unit in premises where condensation can form. Operating condi-
tions of the unit are defined in the Specifications section.
To Next Page
Loading...
