Need help?Do you have a question about the Biosan TS-100 and is the answer not in the manual?
General| Type | Thermo-shaker |
|---|---|
| Orbit | 2 mm |
| Temperature setting resolution | 0.1°C |
| Temperature stability | ±0.1°C |
| Temperature uniformity across the block | ±0.5 °C |
| Display | LCD |
| Shaking speed | 250 to 1400 rpm |
| Digital timer | 1 min to 96 hrs (1 min increment) |
| Overall dimensions (W×D×H) | 205x230x130 mm |
| Power Supply | 50/60Hz |
| Temperature control range | +4°C to +100°C |
Explanation of warning symbols and general safety guidelines for unit operation.
Precautions for electrical connections, grounding, and handling liquid ingress.
Measures for safe operation, alarm signals, and user responsibilities for biological material safety.
Steps for initial setup, power on, and setting temperature, speed, and time.
Procedure for executing programs, continuous operation, and managing the timer.
How to stop platform motion, handle hot surfaces, and power down the unit.
Step-by-step guide to calibrate the unit using an independent sensor.
Crucial warning about the incompatibility of thermoblocks between TS-100 and TS-100C.
To Next Page
