945GC-M7 TE
9
The rmal Ma nage me nt
This option allows you to choose the thermal management method of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
Notes: The choices will be different according to your CPU features.
TM2 Bus Ratio
This option represents the frequency. (Bus ratio of the throttled performance state
that will be in itiated when the on-die sensor goes from not hot to hot.)
Min= 0 Max= 255 Key in a DEC number.
The Choices: 14X (default).
TM2 Bus VID
This option represents the voltage of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
The Choices: 1.2000V (default), 0.8375V-1.6000V.
Limit CPUID MaxVal
Set limit CPUID MaxVal to 3, it should be “Disabled” for Win XP.
The Choices: Disabled (default), Enabled.
C1E Function
This item allows you to choose the C1E function.
The Choices: Auto (default), Disabled.
Execute Disable Bit
When disabled, forces the XD feature flag to always return 0.
The Choices: Enabled (default), Disabled.
Boot Seq & Floppy Setup
This item allows you to setup Boot Seq & Floppy.
To Next Page
Loading...
Need help?
General
