Biostar 945GC-M7 TE User Manual

945GC-M7 TE Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Biostar 945GC-M7 TE Specifications

General

Brand	Biostar
Model	945GC-M7 TE
Category	Motherboard
Language	English

Summary

Chapter 2: Hardware Installation

Installing Central Processing Unit (CPU)

Step-by-step guide for installing the CPU onto the motherboard socket.

Installing System Memory

Instructions for installing DDR2 memory modules into the DIMM slots.

Chapter 3: Headers & Jumpers Setup

Chapter 4: Useful Help

Driver Installation Note

Instructions for installing drivers from the setup CD for optimal system performance.

Award BIOS Beep Code

Table listing BIOS beep codes and their corresponding error meanings.

Troubleshooting

Common probable issues and their corresponding solutions for system problems.

Chapter 5: WarpSpeeder™ III

Installation

Step-by-step guide for installing the WarpSpeeder III software.

Desktop Icon and Main Panel

Overclock/Overvoltage Panel