Biostar 945GC-M7 TE User Manual

945GC-M7 TE
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 I
NSTALLING CENTRAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Pin-Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.

Biostar 945GC-M7 TE Specifications

General

Brand	Biostar
Model	945GC-M7 TE
Category	Motherboard
Language	English