945GC-M7 TE
11
Repo rt NO FDD for Win95
The Choices: NO (default), YES.
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect
the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and sound an
alarm beep.
Disabled (default) Virus protection is disabled.
Enabled Virus protection is activated.
Hyper-Threading Technology
This option allows you to enable or disable CPU Hyper-Threading. “Enabled”
for Windows XP and Linux 2.4.x (OS optimized for Hyper-Threading Technology.)
“Disabled” for other OS (OS not optimized for Hyper-Threading Technology.)
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On
Self-Test (POST) to execute after you power up the computer.
Disabled Normal POST.
Enabled (default) Enable quick POST.
Boot Up NumLock Status
Selects the NumLock State after power on.
On (default) Numpad is arrow keys.
Off Numpad is number keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal A pin in the keyboard controller controls GateA20.
Fast (default) Lets chipset control Gate A20.
Typema tic Rate Se tting
When a key is held down, the keystroke will repeat at a rate determined by
the keyboard controller. When enabled, the typematic rate and typematic
delay can be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the keydown.
The Cho ices: 6 (default), 8,10,12,15,20,24,30
To Next Page
Loading...
Need help?
General
