Biostar A58MDP User Manual

A58MDP/A58MLP
29
AMD Dual Graphics Setup
Step 1: Insert Dual Graphics-Ready graphics card into PEX16_1 slot.
Step 2: Set the BIOS setting as follows:
[Chipset]→[North Bridge]→[GFX Configuration]
→[Surround View]→[Enabled]
Step 3: Install Driver DVD Chipset Driver, and reboot the system. Activate
AMD VISION Engine Control Center to make sure CrossFire has
been enabled.

Biostar A58MDP Specifications

General

Brand	Biostar
Model	A58MDP
Category	Motherboard
Language	English