EasyManuals Logo

Biostar B450MH User Manual

Biostar B450MH
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30 | Chapter 4: Useful Help
4.5 RAID Functions
RAID Denions
In a RAID 0 system data are split up in blocks that get
wrien across all the drives in the array. By using mulple
disks (at least 2) at the same me, this oers superior I/O
performance. This performance can be enhanced further by
using mulple controllers, ideally one controller per disk.
Features and Benets
•  Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the plaorm.
•  Uses: Intended for non-crical data requiring high data throughput, or any environment
that does not require fault tolerance.
•  Benets: provides increased data throughput, especially for large les. No capacity loss
penalty for parity.
•  Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is
lost.
•  Fault Tolerance: No.
•  Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)
Data are stored twice by wring them to both the data disk
(or set of data disks) and a mirror disk (or set of disks) . If
a disk fails, the controller uses either the data drive or the
mirror drive for data recovery and connues operaon. You
need at least 2 disks for a RAID 1 array.
Features and Benets
•  Drives: Minimum 2, and maximum is 2.
•  Uses: RAID 1 is ideal for small databases or any other applicaon that requires fault
tolerance and minimal capacity.
•  Benets: Provides 100% data redundancy. Should one drive fail, the controller switches
to the other drive.
•  Drawbacks: Requires 2 drives for the storage space of one drive. Performance is impaired
during drive rebuilds.
•  Fault Tolerance: Yes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biostar B450MH and is the answer not in the manual?

Biostar B450MH Specifications

General IconGeneral
Non-ECCYes
Memory channelsDual-channel
Memory slots typeDIMM
Number of memory slots2
Supported memory typesDDR4-SDRAM
Maximum internal memory32 GB
Supported memory clock speeds1866, 2133, 2400, 2667, 2933, 3200 MHz
Supported memory module capacities8GB, 16GB
Audio chipRealtek ALC887
Component forPC
Motherboard chipsetAMD B450
Audio output channels7.1 channels
Motherboard form factormicro ATX
Motherboard chipset familyAMD
Windows operating systems supportedWindows 10 Education x64, Windows 10 Enterprise x64, Windows 10 Home x64, Windows 10 Pro x64, Windows 7 Enterprise x64, Windows 7 Home Basic x64, Windows 7 Home Premium x64, Windows 7 Professional x64, Windows 7 Starter x64, Windows 7 Ultimate x64, Windows 7 x64
Thermal Design Power (TDP)105 W
Processor socketSocket AM4
Compatible processor seriesAMD Athlon, AMD Ryzen 3, AMD Ryzen 3 2nd Gen, AMD Ryzen 3 3rd Gen, AMD Ryzen 5, AMD Ryzen 5 2nd Gen, AMD Ryzen 5 3rd Gen, AMD Ryzen 7, AMD Ryzen 7 2nd Gen, AMD Ryzen 7 3rd Gen, AMD Ryzen 9 3rd Gen
Maximum number of SMP processors1
RAID levels0, 1, 10
Number of SATA II connectors0
Number of SATA III connectors4
LAN controllerRealtek RTL8111H
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
BIOS typeAMI
Cables includedSATA
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width198 mm

Related product manuals