To Next PageTo Next PageHow to fix a Biostar Motherboard with no power? Power LED is off?
If your Biostar Motherboard system shows no signs of power, with the Power LED off and the power supply fan not running, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If neither solution works, further assistance is needed.
What to do if Biostar Motherboard won't boot from hard drive?
If your Biostar Motherboard system doesn't boot from the hard disk drive but boots from the optical drive, check the cable connecting the disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It's important to regularly back up your hard drive, as all hard disks can fail at any time.
Why does my Biostar B660GTN Motherboard only boot from optical drive?
If your Biostar Motherboard system only boots from the optical drive, and while hard disks can be read and applications used, the system still fails to boot from the hard disk, back up your data and application files. Then, reformat the hard drive and reinstall applications and data using backup disks.
What to do if Biostar B660GTN Motherboard shows 'Invalid Configuration'?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review your system’s equipment and ensure that the correct information is entered in the setup.
What to do if Biostar B660GTN is inoperative but keyboard lights are on?
If your Biostar Motherboard system is inoperative but keyboard lights are on, the power indicator is lit, and hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
Why Biostar B660GTN won't boot after installing second hard drive?
If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types.
How to fix CPU Overheated error on Biostar B660GTN Motherboard?
If your CPU is overheated, remove the power cord from the power supply for a few seconds, wait, then plug the power cord back in and boot up the system. If the problem persists, clear the CMOS data, wait a few seconds, and power on the system again.
General| Form Factor | Mini-ITX |
|---|---|
| Socket | LGA 1700 |
| Chipset | Intel B660 |
| Memory Type | DDR4 |
| Memory Slots | 2 |
| Max Memory | 64 GB |
| Memory Speed | 3200 MHz |
| M.2 Slots | 2 |
| Storage Interface | 4 x SATA III |
| Audio | Realtek ALC897 |
| LAN | Realtek RTL8125B 2.5Gbps Ethernet |
| Wireless LAN | No |
| Video Outputs | HDMI, DisplayPort |
