To Next Page

To Previous Page

BIOS Update | 3

B660GTQ

7. A dialog pops out aer BIOS ash is completed,

asking you to restart the system. Press the <Y> key

to restart system.

8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS

setup.

Aer entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>

funcon to load Opmized Defaults, and select <Save Changes and Reset> to restart the

computer. Then the BIOS Update is completed.

BIOS Update Ulity (through the Internet)

1. Installing BIOS Update Ulity from the DVD Driver.

2. Please make sure the system is connected to the internet before using this funcon.

3. Launch BIOS Update Ulity and click the “Online

Update” buon on the main screen.

4. An open dialog will show up to request your

agreement to start the BIOS update. Click “Yes” to

start the online update procedure.

5. If there is a new BIOS version, the ulity will ask

you to download it. Click “Yes” to proceed.

6. Aer the download is completed, you will be

asked to program (update) the BIOS or not. Click

“Yes” to proceed.

Biostar B660GTQ User Guide

Other manuals for Biostar B660GTQ