Biostar B760MX-E D4 User Manual

Chapter 4: Useful help | 27
B760MX-E D4｜B760MH D4｜B760MX2-E D4
4.2 AMI BIOS Beep Code
Boot Block Beep Codes
Number of Beeps Descripon
Connuing Memory sizing error or Memory module not found
POST BIOS Beep Codes
Number of Beeps Descripon
1 Success boong.
8 Display memory error (system video adapter)
4.3 Troubleshooting
CPU Overheated
If the system shutdown automacally aer power on system for seconds, that means the CPU
protecon funcon has been acvated.
When the CPU is over heated, the motherboard will shutdown automacally to avoid a
damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fullling with the CPU speed.
Aer conrmed, please follow steps below to relief the CPU protecon funcon.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data. (See “Close CMOS Header: JCMOS1” secon)
2. Wait for seconds.
3. Power on the system again.

Biostar B760MX-E D4 Specifications

General

Brand	Biostar
Model	B760MX-E D4
Category	Motherboard
Language	English