To Next PageTo Next PageHow to troubleshoot no power on Biostar B75MU3 Motherboard?
If your Biostar Motherboard system has no power, with the Power LED off and the power supply fan not working, ensure the power cable is securely plugged in. If it is, try replacing the cable. If the issue persists, contact technical support.
What to do if Biostar B75MU3 only boots from optical drive?
If your Biostar Motherboard system only boots from an optical drive, and the hard disks can be read, but the system fails to boot from a hard disk, back up your data and application files. Then, reformat the hard drive and re-install applications and data using backup disks.
Why Biostar Motherboard cannot boot after installing a second hard drive?
If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
What to do if Biostar B75MU3 shows 'Invalid Configuration' or 'CMOS Failure'?
If your Biostar Motherboard screen message shows “Invalid Configuration” or “CMOS Failure,” review your system’s equipment and ensure the correct information is in setup.
General| Form Factor | Micro ATX |
|---|---|
| Socket | LGA 1155 |
| Chipset | Intel B75 |
| Memory Type | DDR3 |
| Max Memory | 32 GB |
| Memory Slots | 4 |
| Memory Standard | DDR3 1600/1333/1066 |
| SATA 6Gb/s | 1 |
| SATA 3Gb/s | 5 |
| USB 3.0 | 2 |
| USB 2.0 | 6 |
| Audio | Realtek ALC662 6-Channel HD Audio |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| LAN | Realtek RTL8111E |
| Video Outputs | DVI, VGA |
Manages settings for PCI, PCI-X, and PCI Express devices.
Settings for processor cores, speed, and advanced features.
Manages SATA operation modes, speed, and power management.
Controls USB ports, legacy support, and device parameters.
Adjusts DRAM timings, voltage, and other memory parameters.
Sets or modifies the BIOS administrator password.
Sets or modifies the BIOS user password.
Options for CPU ratio, multipliers, and power limits.
Manages DDR3 memory timings and voltage settings.
