Biostar B75MU3 - SATA Configuration Settings

B75MU3+ UEFI BIOS Manual
11
SATA Configuration
SATA Controller(s)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Mode Selection
This item determines how SATA controller(s) operate.
Options: IDE (Default) / AHCI
Aggressive LPM Support
This item enables PCH to aggressively enter link power state.
Options: Disabled (Default) / Enabled
SATA Controller Speed
This item indicates the maximum speed the SATA controller can s upport.
Options: Gen3 (Default) / Gen1 / Gen2