Biostar B75MU3 - AMT Configuration

B75MU3+ UEFI BIOS Manual
14
Firmware updated Configuration
Me FW Image Re-Flash
This item enables or d isables Me FW image Re-Flash function.
Options: Dis abled (Default) / Enabled
AMT Configuration
Intel AMT
This item enables or disables Intel(R) active management technology BIOS
extension. Note: iAMT H/W is always enable. This option just controls the BIOS
extension execution. If enabled, this requires additional firmware in the SPI device..
Options: Enabled (Default) / Disabled