Biostar B760MZ-E PRO User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Biostar B760MZ-E PRO Specifications

General

Processor socket	LGA 1700
Processor manufacturer	Intel
Compatible processor series	Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9
Maximum number of SMP processors	1
Memory channels	Dual-channel
Memory slots type	DIMM
Number of memory slots	4
Supported memory types	DDR5-SDRAM
Maximum internal memory	128 GB
Supported memory clock speeds	5000, 5200, 5400, 5600, 5800, 6000 MHz
Supported storage drive types	HDD & SSD
Supported storage drive interfaces	M.2, SATA III
Parallel processing technology support	-
USB 2.0 connectors	2
EPS power connector (8-pin)	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity	0
Wi-Fi	No
LAN controller	Realtek RTL8125B
Ethernet interface type	2.5 Gigabit Ethernet
Audio chip	Realtek ALC897
Component for	PC
Motherboard chipset	Intel B760
PC health monitoring	FAN, Temperature, Voltage
Audio output channels	7.1 channels
Motherboard form factor	micro ATX
Windows operating systems supported	Windows 10 x64, Windows 11 x64
Cables included	SATA

Weight and Dimensions

Width	244 mm

Summary

FCC Information and Copyright

Short Declaration of conformity

Confirms product compliance with EU directives and essential requirements.

Chapter 1: Introduction

1.1 Before You Start

Essential preparation steps and safety precautions before installing the motherboard.

1.2 Package Checklist

Lists all the items included in the motherboard package for user verification.

1.3 Specifications

Detailed technical specifications of the motherboard, including CPU, chipset, memory, and ports.

1.4 Rear Panel Connectors

Diagrams and descriptions of connectors available on the motherboard's rear I/O panel.

1.5 Motherboard Layout

Illustrations showing the physical layout of components and headers on the motherboard.

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Detailed instructions for safely installing the CPU into the motherboard socket.

2.2 Install a Heatsink

Procedure for mounting the CPU heatsink and fan assembly correctly.

2.3 Connect Cooling Fans

Information on connecting CPU and system cooling fans to the motherboard headers.

2.4 Install System Memory

Guide on how to properly insert DDR5 memory modules into the motherboard slots.

2.5 Expansion Slots

Details on different PCI-Express slot types and their specifications for expansion cards.

2.6 M.2 Socket Installation

Description of M.2 socket types and their support for SSD modules and Wi-Fi cards.

2.7 Installation Procedures

Steps for installing M.2 anchors and expansion cards into the motherboard.

2.8 Jumper & Switch Setting

Explanation of jumper settings, including the Clear CMOS jumper and its procedure.

2.9 Headers & Connectors

Description of various internal headers and external connectors on the motherboard.

2.10 Debug LEDs

Explanation of the motherboard's debug LEDs and their indicators for system status.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Instructions on how to access and navigate the UEFI BIOS setup utility.

3.2 BIOS Update

Methods for updating the motherboard's BIOS using BIO-Flasher and Update Utility.

3.3 Software

Details on installing and launching system software, including the BIOScreen Utility.

Chapter 4: Useful Help

4.1 Driver Installation

Steps to install drivers and software from the included DVD for optimal system performance.

4.2 AMI BIOS Beep Code

List of beep codes indicating system status during boot or POST.

4.3 AMI BIOS Post Code

Table of POST codes with descriptions for diagnosing boot-related issues.

4.4 Troubleshooting

Guidance on resolving common issues, such as CPU overheating and protection functions.