Name: Biostar H410MH
Brand: Biostar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 2: Hardware installaon | 9

H410MH / H410MHP

2.2 Install a Heatsink

Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four

fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest

to the CPU fan connector.

Step 2: Press down two fasteners at one me in a diagonal sequence to secure the CPU fan

assembly in place. As each fastener locks into posion a click should be heard.

Note

 ApplythethermalinterfacematerialontheCPUbeforeheatsinkinstallaon,ifnecessary.

 DonotforgettoconnecttheCPUfanconnector.

 Forproperinstallaon,pleasekindlyrefertotheinstallaonmanualofyourCPUheatsink.

Questions and Answers:

Need help?

Do you have a question about the Biostar H410MH and is the answer not in the manual?

Biostar H410MH Specifications

General