To Next PageTo Next Page
Need help?Do you have a question about the Biostar Hi-Fi H77S and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket | LGA 1155 |
| Chipset | Intel H77 |
| Memory Type | DDR3 |
| Maximum Memory Supported | 32GB |
| SATA 6Gb/s | 2 |
| SATA 3Gb/s | 4 |
| USB 3.0 | 2 |
| Audio | Realtek ALC892 8-Channel HD Audio |
| Memory Standard | DDR3 1600/1333 |
| USB 2.0 | 8 |
| LAN | Realtek RTL8111E Gigabit LAN |
| RAID Support | 0, 1, 10 |
Displays system information including UEFI BIOS version, model, and build date.
Allows setting the system date and internal clock for accurate timekeeping.
Shows the current user's access level within the BIOS setup utility.
Displays system memory size, excluding any allocated VGA shard memory.
Configures CPU settings like cores, speed, technologies, and power states.
Configures PCI, PCI-X, and PCI Express bus settings and parameters.
Manages ACPI features like hibernation, sleep states, and power events.
Configures SATA controller modes, device enabling, and self-test.
Manages USB ports, legacy support, XHCI hand-off, and device timeouts.
Monitors system temperatures, voltages, and controls fan speeds.
Configures Platform Controller Hub I/O devices, including PCI Express.
Adjusts PCI Express port speed, ASPM, and Gen3 equalization.
Configures VT-d, primary display, and integrated graphics memory settings.
Manages memory settings like Max TOLUD, MRC Fast Boot, and memory remapping.
Specifies the boot device priority sequence from available devices.
Enables or disables the Compatibility Support Module for legacy OS.
Enables or disables booting from UEFI-compliant devices.
Protects the BIOS from unauthorized write or erase operations.
Sets or changes the Administrator password for BIOS setup access.
Sets or changes the User password for system power-on.
Sets the default entrance page when entering the UEFI BIOS Setup.
Adjusts CPU ratio, clock speed, turbo mode, and power limits for performance.
Manually adjusts DDR3 timings, multiplier, command rate, and voltage.
Configures iGFX core current and graphics ratio limit for performance.
Displays SPD (Serial Presence Detect) information of DDR3 memory modules.
Saves current BIOS settings and resets the system to apply them.
Loads factory default BIOS settings for system stability and compatibility.
Launches the UEFI BIOS built-in EFI Shell for advanced system tasks.
