Biostar K8M800 MICRO AM2 Setup Manual

K8M800 Micro AM2
7
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate
sense
14
JCFAN1
4 Smart Fan
Control
JSFAN1: System Fan Header
Pin
Assignment
1 Ground
2 +12V
13
JSFAN1
3FAN RPM rate
sense
Note:
The JCFAN1 and JSFAN1 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

Biostar K8M800 MICRO AM2 Specifications

General

Brand	Biostar
Model	K8M800 MICRO AM2
Category	Motherboard
Language	English