To Next PageTo Next PageWhat to do if my Biostar NF61S MICRO AM2 SE Motherboard has no power?
If your Biostar Motherboard has no power, and the power light doesn't illuminate, ensure the power cable is securely plugged in. If it still doesn't work, try replacing the cable.
Why Biostar NF61S MICRO AM2 SE cannot boot after installing a second hard drive?
If your Biostar Motherboard cannot boot after installing a second hard drive, ensure that the master/slave jumpers are set correctly. Also, run the SETUP program and select the correct drive types.
What to do if Biostar NF61S MICRO AM2 SE does not boot from hard disk?
If your Biostar Motherboard does not boot from the hard disk drive but can boot from the optical drive, check the cable running from the disk to the disk controller board, making sure both ends are securely plugged in. Also, check the drive type in the standard CMOS setup. It's important to back up your hard drive, as hard disks can fail at any time.
How to resolve “Invalid Configuration” or “CMOS Failure” on Biostar NF61S MICRO AM2 SE Motherboard?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
What to do if Biostar Motherboard won't boot from hard drive?
If your Biostar Motherboard won't boot from the hard drive but can boot from the optical drive, check the cable running from the hard disk to the disk controller board, ensuring both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It is also important to back up your hard drive, as hard disks can fail at any time.
How to fix Biostar NF61S MICRO AM2 SE not booting after installing a second hard drive?
If your Biostar Motherboard fails to boot after installing a second hard drive, ensure that the master/slave jumpers are set correctly. Then, run the SETUP program and select the correct drive types. For compatibility issues with other drives, contact the drive manufacturers.
What to do if Biostar NF61S MICRO AM2 SE system is inoperative but keyboard lights are on?
If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drive is spinning, apply even pressure on both ends of the DIMM and press down firmly until the module snaps into place.
What to do if Biostar NF61S MICRO AM2 SE Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure that the correct information is in the setup.
General| Form Factor | Micro ATX |
|---|---|
| Socket Type | AM2 |
| Memory Type | DDR2 |
| Number of Memory Slots | 2 |
| Maximum Memory Supported | 4 GB |
| PCI Express x16 | 1 |
| PCI Express x1 | 1 |
| PCI Slots | 2 |
| SATA | 4 |
| IDE | 1 |
| Audio Chipset | Realtek ALC662 |
| Audio Channels | 6 |
| LAN Chipset | Realtek RTL8201CL |
| Max. LAN Speed | 10/100 Mbps |
| Chipset | NVIDIA GeForce 6100 |
Detailed specifications and features of the motherboard models.
Step-by-step guide for installing the Central Processing Unit (CPU).
Instructions for installing RAM modules into the DIMM slots.
Common issues and their probable solutions for system operation.
Details on overclocking, voltage control, and hardware monitoring.
