J
Joseph BrownJul 31, 2025
What to do if my Biostar NM70I-847 has no power?
- JJessica WilliamsJul 31, 2025
If your Biostar Motherboard has no power, ensure the power cable is securely plugged in. If the issue persists, try replacing the power cable.
To Next PageTo Next PageWhat to do if my Biostar NM70I-847 has no power?
If your Biostar Motherboard has no power, ensure the power cable is securely plugged in. If the issue persists, try replacing the power cable.
How to fix Biostar NM70I-847 Motherboard that cannot boot after installing a second hard drive?
If your Biostar Motherboard cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Also, run the SETUP program and select the correct drive types.
General| Form Factor | Mini ITX |
|---|---|
| Chipset | Intel NM70 |
| Max Memory | 16 GB |
| Memory Standard | DDR3 1333/1066 |
| Audio | Realtek ALC662 6-Channel HD Audio |
| CPU | Intel Celeron 847 |
| Memory Slots | 2 |
| Storage | 2 x SATA 3Gb/s |
| USB Ports | 4 x USB 2.0 |
| LAN | Gigabit Ethernet |
| Video Output | HDMI, VGA |
| Power Connector | 24-pin ATX |
Configures PCI, PCI-X, and PCI Express settings for system devices.
Configures Advanced Configuration and Power Interface settings for power management.
Manages CPU-related settings, including Hyper-Threading and core activation.
Configures SATA controller operation and SMART self-test for HDDs.
Manages USB device support, EHCI hand-off, and emulation settings.
Configures Serial and Parallel port settings for I/O devices.
Configures PCH-IO parameters, including USB and Azalia settings.
Manages graphics and memory configurations for the system agent.
Sets a password to restrict access to BIOS setup.
Sets a password required for system boot or setup access.
Configures fixed CPU ratio and adjusts the CPU ratio for performance.
Manages CPU Spread Spectrum, C1E, SpeedStep, and core current limits.
